Table of Contents
Advertisement
digiConnect Windows® Software
digiConnect Windows® Software v5.00 onwards
Minimum Recommended PC Speci cation
Processor: Intel P4 1.4GHz, AMD Athlon 1.4 GHz
Memory: 512Mbytes
Hard disk: 40 Gbytes
Video Resolution: 1024 x 768
Operating Systems: Windows 7 / Windows 8 / Windows 10
Please note: You will need a digiDL Con guration Kit with Tachosys product
code DDLCK which contains a power supply and a mini USB cable for desktop
setup.
Important: do not connect any of the cabling provided in the digiDL Con guration
kit with the digiDL before commencing the software installation.
Installing the digiConnect Windows® Software
1.
Insert the ash drive provided in the digiDL product family con guration
kit into your PC. Within the ash drives home folder, double click the
'setup' le. Windows will ask you to verify that you are happy to pro-
ceed. (Alternatively, download the digiConnect software from our web-
site https://tachosys.com/Downloads/Software).
2.
Select the language required and click OK. This will initiate installation.
3.
Click 'Next' when prompted.
4.
Read the terms of the Licence Agreement then click on the 'I accept the
terms in the Licence agreement' option and then click 'Next'. If you
choose to not accept the terms, the installation will be terminated.
5.
Choose the folder in which you wish the software program les to be
installed. The default folder is the standard location for Windows® pro-
grams. Click 'Next'.
6.
Click 'Install' to begin the actual installation. This may take several
minutes.
7.
Finally leave the box labelled 'Launch digiConnect' ticked and click
'Finish'.
8.
The application will display any connected device(s).
9.
The Options screen allows you to customise your installation.
10.
Now follow the instructions for 'Connecting the digiDL-B or BT to your
PC' on page 17.
DigiDL-B / BT Installation Guide
Connecting the digiDL-B / BT to your PC
1.
You will need to power the digiDL-B / BT using the power supply in your
con guration kit or by it being connected to a vehicle's Tachograph.
2.
Connect the standard USB cable supplied in the digiDL con guration kit
(A to Mini) to a free USB socket on your PC. Connect the other end of the
USB cable to the USB socket on the digiDL-B / BT.
4.
Once all connections are made, simply open digiConnect and you should
see the digiDL-B / BT, along with its con guration options as shown
below (see Fig 7.).
If you are having problems connecting to your digiDL-B / BT then repeat the
steps above.
Page - 16
DigiDL-B / BT Installation Guide
Fig 7.
Page - 17
Advertisement
Table of Contents
Need help?
Do you have a question about the digiDL-B and is the answer not in the manual?
Questions and answers