Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Tachosys digiDL-B
-
Page 2: Table Of Contents
VDO and Secondary CAN-Bus enabling CAN-Bus Baud Rates Rear Security Seal digiDL-B / BT connections 9-10 digiDL-B / BT LED Indicators digiDL-E Model - Front Port download on VDO Tacho- 12-15 graphs. Plus unlocking the Front Port. Installing digiConnect® software... -
Page 3: Checking Compatibility Of Vehicles
12 volt models however there are many Volvo and some Renault that are a ected. Tachosys supply a product called digiDL-E that allows the use of the Tachograph Front Port for Remote download. You will also need the K-Line cable (DDL-Kline) with this solution. -
Page 4: Special Vehicle Manufacturer Considerations
The standard CAN bus address for remote download is FB. However for all Enhanced Tacho Cable - DDL-ETC (Recommended for all installations) Tachosys remote download devices programmed from Nov 2020, the CAN bus addresses are set to FA as default. This prevents issues occurring where more Please note that whilst we have a range of cable options we recommended the than one device is set to FB. -
Page 5: Vdo And Secondary Can-Bus Enabling
Fig 1. Front Back If the CAN LED (GREEN) does not illuminate on the digiDL-B / BT and the Tachograph has a Secondary CAN-Bus this is the likely cause. The VDO programmer settings as we know them are; Programming – TCO Parameters –... -
Page 6: Digidl-B / Bt Led Indicators
IMPORTANT! - digiDL-B / BT placement information: please make sure you do In the case of digiDL-BT attach In the case of digiDL-B attach not place the digiDL-B / BT too close to other comms devices. Preferably place the GSM and GPS cables as the short antenna to the GSM the unit at with the antenna closest to an exterior panel as possible. - Page 7 The product codes are as follows; check the model of your Tachograph with your provider before endeavouring to t a digiDL, digiDL-B, digiDL-BT, digiDL-E or EX. You can check your Code: A2C59512046 – 1 unlock tachograph model number at http://dealerzone.tachosys.com as part of a Code: A2C59512047 –...
- Page 8 The con guration software view for the digiDL-E is slightly di erent to the settings are broader than for the standard digDL. digiDL-B or BT as there is additional functionality. If you are using the digiDL-E for Front Port download on a VDO Tachograph then you need only be Please use digiConnect to set the “Sources”...
-
Page 9: Connecting The Digidl To Your Pc
Windows® Software v5.00 onwards Minimum Recommended PC Speci cation You will need to power the digiDL-B / BT using the power supply in your con guration kit or by it being connected to a vehicle’s Tachograph. Processor: Intel P4 1.4GHz, AMD Athlon 1.4 GHz... - Page 10 Fig 8. Fig 9. Firmware Version of rmware on device Fig 9. shows the GPRS settings for digiDL-B / BT. Serial Number Unique to each device. For the GPRS network settings, navigate to the ’Mobile Network’ tree Used as a means of security between the view.
- Page 11 Support data or Counter data and their analysis provider presents this data memory storage then it should be turned ON. USB connection status Connected to Tachograph via: this setting is not applicable to digiDL-B or BT. Serial connection status to PC Power...
-
Page 12: Authentication Of The Company Card
Tachosys product which runs on Windows servers to provide a communications platform for our devices. The majority of online Tachograph The digiDL-B / BT stores the les it downloads from the Vehicle Unit within its analysis providers have a digiCentral server in operation. digiDL-B / BT needs internal memory. -
Page 13: Troubleshooting
If the unit still fails then you can view the status of connectivity in the digiConnect Current Status Now the challenge is to nd a position where the digiDL-B or BT is far enough window. The code displayed will show the stage of connection. -
Page 14: Overview Of Digicentral Web
Most of the online providers of Tachograph Analysis have their own digiCentral server. Each will have a di erent web address. digiCentral is not just used for digiDL-B / BT it can receive data from any Tachosys product using di erent communication methods. - Page 15 Albion House 48 Albert Road North Reigate, Surrey, RH2 9EL United Kingdom Phone: +44 (0) 208 687 3900 Fax: +44 (0) 208 687 3919 E-mail: info@tachosys.com...