Match Code; Screen Icon - Chacon 34817 Installation And Operation Manual

Notice : When the outdoor unit is mounted on the thicker wall where effects the signal,
please extend the build-in Antenna of outdoor unit with Extend antenna.

Match code

1. Under the monitor status, Press
2. Press the call button to switch on the outdoor-camera.
3. Press the call button about 3 seconds of the outdoor-camera.
4. If register is successful, the interface will be shown
5. If register fail, the interface will be showed

Screen Icon

1. Photograph:
1. When a visitor presses the call button of outdoor-camera ,it will take a photo.
2. Under the monitor status or intercom status, press the
2. View photo:
Under the monitor status, press the
1. Press the button to enter delete dialog box. Press the
2. press the button to exit
3. Setting the bell tone:
Under the monitor status, press the
4. Adjust the ring volume:
Under the intercom status, press the
5. Adjust the brightness:
Under the intercom status, press the
6. Date / Time setting:
1. Under the monitor status, press the
2. Press the or
button about 3 seconds then will pop up interface
Monitor status
indicator
Signal indicator
Intercom status
indicator
Call status indicator
or
or
button to select item,
icon.
icon, then need to re-register.
button, you can view the photo,
button to select bell tone.
or button to adjust volume.
or button to adjust brightness.
button about 3 seconds to enter time setting.
Volume indicator
Indoor-monitor
battery indicator
Outdoor-camera
battery indicator
button, it will take a photo.
button to confirm.
EN
5