Batch Option - Hitachi iH-210 User Manual

5-11. Batch option

1) Batch Warning ON/OFF
If the banknote is removed from the stacker pocket when the batch is not completed, a beep
sounds.
2) Select Batch Option (Validate)
Only counting results for which Batch is completed are saved and displayed on the screen.
A total of four operations are possible depending on the use of ADD function.
- ADD OFF + Validate OFF
The counting result is retained until all notes are removed from the Hopper and Stacker. When all
banknotes are removed and counted again, the count result becomes '0', and the final counting
information is not accumulated.
- ADD OFF + Validate ON
The counting result is retained until all notes are removed from the Hopper and Stacker.
After completion of counting, the counting information for banknotes by the uncompleted batch is
not accumulated.
When counting again after removing all notes, the starting count becomes '0' and the final counting
information is not accumulated.
- ADD ON + Validate OFF
The counting result is retained until all notes are removed from the Hopper and Stacker.
After removing all notes, when counting again, the count becomes '0' and the final counting
information is accumulated.
- ADD ON + Validate ON
The counting result is retained until all notes are removed from the Hopper and Stacker.
After completion of counting, the counting information for banknotes by the uncompleted batch is
not accumulated.
Hitachi Terminal Solutions Korea Co., Ltd.
iH-210 User Guide
54