Level - Hitachi iH-210 User Manual

iH-210 User Guide

3-8. LEVEL

This function is available when "Fit Level Activation" is turned on. (4-3. Operation- page 38~39)
When click "LEVEL" icon, the level is changed to High -> Middle -> Low.
If you long click the icon, LEVEL Setting screen is shown.
In the area marked in red, you can set the version, volume, level and level step you want to change.
When counting on the LEVEL screen, the level setting target is automatically changed to the
version and denom of the counted note.
If "Fit Level Activation" is turned off, Middle level is default.
By clicking "<" or ">" button, you can increase the each parameters by 5 units.
After selecting a parameter, click on the yellow colored area and you can enter the parameter
value directly.
After change the parameter value, you have to click "SAVE" button to save the change.
When click "Default", the default value is loaded.
By IMPORT and EXPORT button, you can load the parameter level from USB or save the currenct
level to USB.
1) CF Parameters: IR, MG, UV, Double, Compare SN
Hitachi Terminal Solutions Korea Co., Ltd. 31