Hitachi iH-210 User Manual
Hitachi iH-210 User Manual

Hitachi iH-210 User Manual

3 pockets banknote sorter

Advertisement

3 Pockets Banknote Sorter
iH-210 is advanced banknote processing machine with
maximized efficiency technology with 3 pockets
banknote sorter.
Rev. 1.0.0
Date: 2019. 12. 23

Advertisement

Table of Contents
loading

Summary of Contents for Hitachi iH-210

  • Page 1 3 Pockets Banknote Sorter iH-210 is advanced banknote processing machine with maximized efficiency technology with 3 pockets banknote sorter. Rev. 1.0.0 Date: 2019. 12. 23...
  • Page 2: Table Of Contents

    3-15. USER ..........................33 4. MENU Screen 4-1. Machine info ........................34 4-2. System Setting ........................34 4-3. Operation ........................... 38 4-4. Comm Info.......................... 39 4-5. PIN Code ........................... 40 4-6. Upgrade ..........................40 Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 3 5-12. SN / Full Image......................... 52 5-13. Fitness ..........................53 5-14. Fitness Viewer........................53 5-15. Image Viewer ........................53 5-16. Key Function Setting......................54 6. Specification..........................56 7. Error Code ..........................57 8. Maintenance ..........................58 Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 4: Introduction

    User Guide Introduction Thank you for purchasing iH-210. iH-210 is compact size with full Function 3 Pockets and saving workspace and minimize the cash processing movement. iH-210 has Full color Dual CIS Sensor and equipped with a range of counterfeit detection technologies.
  • Page 5 Never try any prohibited matters. This symbol denotes that there are indication matters which should be done without fail. Please read the indicated matters thoroughly and always perform them as shown. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 6 1m or less from heating apparatus such as stoves, heaters etc. Any place with direct winds blown from air conditioners, ventilating openings etc. There are safety problems and deterioration of the product may be accelerated, which leads to any cause for failure. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 7 Do not use or put the combustible materials such as thinner, combustible gas, or a high-volatile object around/inside the product. Otherwise, it may cause explosion and/or fire due to heating from the product or flashing from power supply.. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 8 2. The product should be used at the specified frequency. If it is used at other than the specified frequency, it may cause an accident. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 9 4. Do not turn off air heating suddenly when the product is completely cold. Moisture may adhere inside the product due to sudden air heating and it may cause electric shock. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 10 3. When working ensure that all doors of the machine are locked. If a door is left open it may cause body injury or damage to property. Do not touch the gear etc. It may cause injury. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 11 2. The socket-outlet shall be installed near the equipment and shall be easily accessible. 3. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 12 Ne jamais essayer des choses interdites. Ce symbole indique qu'il y a des problèmes d'indication qui doivent être réalisés sans faute. Veuillez lire attentivement les informations indiquées et effectuez-les toujours comme indiqué. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 13 1 m ou moins de matières combustibles volatiles ou de rideaux. 1 m ou moins d'appareils de chauffage tels que poêles, appareils de chauffage, etc.. Tout endroit directement soumis à des vents soufflant des climatiseurs, des ouvertures de ventilation, etc. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 14 / à l'intérieur du produit. Sinon, cela pourrait provoquer une explosion et / ou un incendie dû à la chaleur du produit ou au clignotement de l'alimentation. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 15 / ou un choc électrique. 2. Le produit doit être utilisé à la fréquence indiquée. S'il est utilisé à une fréquence autre que celle spécifiée, cela peut provoquer un accident. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 16 3. Les pièces électriques à l’intérieur du produit ne doivent pas être mouillées par la pluie ou l’eau lors du nettoyage, etc. S'ils sont mouillés, cela peut provoquer un choc électrique et / ou un choc électrique. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 17 3. Lorsque vous travaillez, assurez-vous que toutes les portes de la machine sont verrouillées. Si une porte est laissée ouverte, cela peut causer des blessures corporelles ou des dommages matériels. Ne touchez pas l'engrenage, etc. Cela pourrait vous blesser. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 18 2. La prise de courant doit être installée à proximité de l'équipement et doit être facilement accessible. 3. Risque d'explosion si la batterie est remplacée par un type incorrect. Jetez les piles usagées conformément aux instructions. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 19: Packing List

    User Guide Packing List iH-210 Series Manual Power Cable Options (sold separately) External Display Serial Printer Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 20: Appearance

    User Guide Appearance <Front View> Reject Pocket Hopper Hopper Guide LCD Display Operation Keys Stacker L Stacker R <Rear View> Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 21: Before Using

    (Devices) External External Display Display Power Switch Power Supply Socket Before Using Avoid counting wet, excessively dirty or spoiled notes. Check for foreign matter (paper chips, rubber bands, clips, dust etc.) mixed with notes. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 22: Key Operation

    Remove folds or end from notes beforehand. Spread and separate brand new notes well for some of them are slightly adhesive. Align all the four corners and edges of notes. Any unevenness may cause an error. 1. Key Operation Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 23: Display Operation

    Not available. Short Key Go to ETC screen. RIGHT 2 Long Key Not available. Short Key Stop the machine operation manually. RIGHT 3 Go to the previous screen. Long Key Not available. 2. Display Operation Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 24 Set Batch number for Stacker L and Stacker R. Set User Level. (High, Middle, Low). Enter Menu screen Set Operation Mode. (VALUE, PREFIT, ATM, FIT, ATM+FIT). Icon for printing the receipt of counting result. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 25: Basic Operation

    User Guide Turn on/off ADD function. Enter ETC screen. Date&Time Display and set date and time. User Display the current user and select the user. 3. Basic Operation Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 26: Currency Mode

    User Guide Date&Time User 3-1. Currency Mode (including Multi Currency) By short touch the currency icon, change the currency mode. If long touch the currency icon, go to “Select Local” screen. 3-2. Count Mode Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 27 When select Version(OLD, NEW, V-NEW), only the version is sent to Left Pocket or Right Pocket. When select a denomination, the denomination is counted. 4) USER: the user set the pocket option for counting notes. After select USER mode, long touch “USER”, “POCKET OPTION” screen is shown. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 28: Stacker Pocket Information

    And the color of icon is changhed by the selected count mode. By short touch Left&Right Pocket icon, Pocket Information screen is shown. When click “SN” icon, the details of SN regognition are shown. (SN function must be turned on.) Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 29: Count Result On Main Screen

    When touch the count result displayed on the screen, Count Result screen is shown. 3-5. Reject Pocket Information You can check the batch number and the rejected notes by Reject Pocket icon. By short touch Reject Pocket icon, Pocket Information screen is shown too. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 30: Speed

    The range of batch number is as below. LP1 and RP1 : 10 ~ 300 notes REJECT: 10 ~ 150 notes After enter the speed, you have to click “SAVE” button to save the change. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 31: Level

    When click “Default”, the default value is loaded. By IMPORT and EXPORT button, you can load the parameter level from USB or save the currenct level to USB. 1) CF Parameters: IR, MG, UV, Double, Compare SN Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 32 User Guide 2) PreFIT Parameters: Dogear, Tear, Hole, Tape X, Tape Y 3) FIT 1 Parameters: Soil, Deinked, Stain, Graffiti 4) FIT2 Parameters: Composed, Mulilation, Crumple Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 33: Menu

    - PREFIT: Detect(Reject) Dogear, Tear, Hole and Tape notes. - ATM: Sort the notes by ATM and UNFIT. - FIT: Sort the notes by FIT and UNFIT. - ATM+FIT: Sort the notes by ATM, FIT and UNFIT. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 34: Print

    User Guide 3-11. PRINT When click “PRINT” icon, the currenct counting result is printed to receipt. 3-12. ADD Turn on or off ADD function. 3-13. ETC When click “ETC” icon, enter ETC screen. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 35: Date&Time

    When short click USER icon, the registered users are selected in turn. If you long click the icon, USER INFORMATION screen is shown. Select the user, enter the relevant information and press the "SAVE" button to save the entered user information. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 36: Menu Screen

    User Guide 4. MENU Screen 4-1. Machine info You can check S / W information, machine serial number, and local currency information on the machine.. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 37: System Setting

    NAME: Print the user name to the receipt. BANK: Print the bank name to the receipt. BRANCH: Print the branch name to the receipt. SN: Select Serial Number output type. (OCR, Image, OFF) 3) TACHOMETER Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 38 The number of bills sent to the reject pocket can be checked for each classified error. - UNFIT You can check the number of banknotes recognized as UNFIT. 4) Screen Saver If the machine is idle for a selected amount of time, the LCD screen will dim. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 39 Touch “+” shape in the order of the numbers on the screen until the numbers turn yellow. If it doesn't turn yellow, touch another + first. When all five are yellow, the setting is complete. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 40: Operation

    User Guide 4-3. Operation 1) Denom Display If it is set to ON, all denominations of the local currency is displayed on the count screen. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 41 Set the reference pocket (Pocket Left or Pocket Right). When counting bills, the counted notes are stacked to the reference pocket first. 10) Two Reject Pocket Set two reject pockets. One of the stacker pockets becomes a reject pocket, and the pockets are stacked with discriminated counterfeits. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 42: Comm Info

    When press “Default” button, Default ENET Setting is loaded. 2) External Display - Display Type: FND type and LCD type can be selected. - Display Mode: Select information displayed on the screen of External Display. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 43: Pin Code

    You can enter and modify the machine's pincode and load the default pincode. 4-6. Upgrade Upgrade S/W of the machine via USB. 4-7. Machine Status You can check the motor, solenoid, counter sensor and FND LED status of the machine. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 44 When "Motor OFF" button is pressed, all motors start running and the speed is shown on the screen. 2) Solenoid You can check the operation each solenoid by turning it ON/OFF. SOL 3 and SOL 4 are for IH-410 series. 3) CNT Displays the current status of each count sensor. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 45: Machine Setting

    You can check the operating status of all FNDs and LEDs. 4-8. Machine Setting You can set the installed CNT Sensor, CIS Sensor, MG Sensor, UV Sensor and TDS. Please refer to the service manual for the setting method. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 46: User Setting

    User Guide 4-9. User Setting You can register user information. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 47: Etc Screen

    - CF BUZZER: If a counterfeit is detected, a pop-up message is output after the buzzer warning tone. - CF STOP: When detecting a counterfeit, a pop-up message is output after the machine stops operating. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 48: Direction

    You can sort the counted notes by version of the banknote. 1) Separate Version ON/OFF Version classification can be turned on or off. 2) Select Version Select a specific version, and only that version is ejected into the Stacker Pocket. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 49: Manual Start

    2) ATM: Sum of ATM count results in ATM and ATM+FIT Mode. 3) FIT: Sum of FIT count results in FIT and ATM+FIT Mode. 4) UNFIT: Sum of UNFIT count results in ATM and FIT Mode. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 50: Teller

    1) Note Info: Collect data except the note image data. Save data from multiple notes at the same time. 2) Data Acq: Collect data including the note image data. Save data from one note only. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 51: Manual Add

    After enter the quantity of the desired denominations, click “SAVE”. 2) ADD COIN: Enter the desired coin value directly and add it to the count result. (Can be up to 2 decimal places) After enter coin value, click “Enter” button. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 52: Deposit

    - Add Note: The quantity for the entered denomination is added and settled. - Add Coin: Add the entered coin value and settled (up to 2 decimal places) - Add cheque: The entered quantity of cheque is added and settled. - Finish: Deposit completed. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 53: Dispenser

    - Dispenser: When press the butoon, Amount, Denom, Off are changed in order. - Amount: When press button, you can enter the amount - Denom: Denom button allows you to enter the quantity for each denomination. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 54: Batch Option

    - ADD ON + Validate ON The counting result is retained until all notes are removed from the Hopper and Stacker. After completion of counting, the counting information for banknotes by the uncompleted batch is not accumulated. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 55: Sn / Full Image

    Compare by the number of set characters. For example, if you set only 'X', all notes that start with 'X' are rejected. After selecting the registered Black List, press and hold the screen to edit. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 56: Fitness

    Each item of fitness Parameters can be set to Unfit recognition, Reject processing, or OFF (not detected). 5-14. Fitness Viewer You can see the fitness status of the inserted banknotes as a value (0 ~ 100). Multiple notes can be counted simultaneously.. 5-15. Image Viewer Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 57: Key Function Setting

    MANUAL STOP Key to stop the machine manually. INIT COUNT Initialize the counting result. CF(0) Turn on/off all CF functions. Go to ETC –> CF function screen. CF(1) VER(0) Turn on/off Version separation function. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 58 Go to SPEED setting screen. PRINT Print the receipt of the current counting result. MENU Go to MENU screen. Go to ETC screen. Turn on/off ADD function FITNESS Select Operation Mode. (VALUE, PreFIT, ATM, FIT, ATM+FIT) Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 59: Specification

    Approx. 21 Kg User Interface LAN, USB(Serial) x 2, USB(host), RS232C x 3 Power Supply 100 - 240V ~ 50/60Hz Full Color Dual CIS Sensor Information Reflection( R, G, B, IR, UV) x 2, Transmisson(IR) Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 60: Error Code

    Batch Full Error E4001 Batch Full Error E4002 Different Case Dispenser error E4003 Dispenser Error Pocket Error E4004 Pocket Error E5001 Double Error E5002 IR Error E5003 UV Error (Spot UV Error) E5004 MG Error Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 61 Code E6004 Graffiti E6005 Composed E6006 Mutilation E6007 Dogear E6008 Tear E6009 Hole E600A Tape Tape X E600B Tape Tape Y E600C Crumple E7001 Compare SN Compare SN E7002 Black List Black List Error Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 62: Maintenance

    Users are recommended to clean the machine sensors at least once a day. Refer to following section and clean the machine regularly. ※ Please turn the power off before cleaning the machine. Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 63 User Guide RD MODULE FD MODULE UP BODY 2 and 3 ASM LOWER BODY 2 and 3 ASM Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 64 User Guide HOPPER SENSOR STACKER SENSOR STACKER SENSOR FRONT DUST BOX REAR DUST BOX Hitachi Terminal Solutions Korea Co., Ltd.
  • Page 65 User Guide Hitachi Terminal Solutions Korea Co., Ltd. 7-6, Samsung 1-ro 4-gil, Hwaseong-si, Gyeonggi-Do, Korea TEL: +82-31-211-8761 FAX: +82-31-211-8763 Hitachi Terminal Solutions Korea Co., Ltd.

Table of Contents