Download Print this page

RBC kits Komet Building Instructions page 18

Advertisement

out as much as you need, there is a left and a right side fairing the writing is on the wing section of the
fairing and a L is on the small fairing surplus midpiece. Test fit and glue to wing and fuselage, finish
with ultralight filler and sand
Place rudder steering cable through fuselage, straight line from nose to back
Bend 2mm steel wire for tailwheel , glue a short piece of steering cable into the rudder to take the
steel, place hinges and check for free movement , place rudder horn into rudder, harden horn with
thin ca

Advertisement

loading

This manual is also suitable for:

Me163