Table of Contents
Advertisement
BIOSTAR Motherboard
provide user the ability to do real-time overclock adjustment.
Warning: Manually overclock is potentially dangerous, especially when
the overclocking percentage is over 110 %. We strongly recommend you
verify every speed you overclock by click the Verify button. Or, you can
just click Auto overclock button and let [ WarpSpeeder
gets the best result for you.
restoring way if system need to do a fail-safe reboot.
will set the best and stable performance and frequency automatically. [WarpSpeeder
utility will execute a series of testing until system fail. Then system will do fail-safe
reboot by using Watchdog function. After reboot, the [ WarpSpeeder
restore to the hardware default setting or load the verified best and stable frequency
according to the Recovery Dialog's setting.
proceed a testing for current frequency. If the testing is ok, then the current frequency
will be saved into system registry. If the testing fail, system will do a fail-safe rebooting.
After reboot, the [ WarpSpeeder
or load the verified best and stable frequency according to the Recovery Dialog's setting.
Note: Because the testing programs, invoked in Auto-overclock and Verify, include
DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or newer runtime
library is required. And please make sure your display card's color depth is High
color (16 bit) or True color( 24/32 bit ) that is required for Direct3D rendering.
28 28 28 28 28
English
English
English
English
English
a. "-3MHz button", "-1MHz button", "+1MHz button", and "+3MHz button":
b. "Recovery Dialog button": Pop up the following dialog. Let user select a
c. "Auto-overclock button": User can click this button and [ WarpSpeeder
d. "Verify button": User can click this button and [ WarpSpeeder
TM
] utility will restore to the hardware default setting
TM
] automatically
TM
]
TM
]
TM
] utility will
TM
] will
Advertisement
Table of Contents
