I forgot my password for accessing the Web GUI.
Restore your NAS to its original factory default settings.
How to restore my NAS to its original factory default settings?
• Press and hold the reset button for more than five seconds until the power LED starts
blinking blue.
• Use the Web GUI. See 3.3.19 Saving / loading / restoring system settings for details.
Below are the factory default settings on your NAS:
Username: admin
Password: admin
NAS name: NAS-M5
Web GUI address: http://nas-m5
IMPORTANT:
System restoration clears the server and account settings on your NAS. You have to
reconfigure these settings before you can share folders with others.
After system restoration, I cannot open the NAS network folder from
the Windows® My Computer screen.
It is because that system restoration clears the account and shared folder settings on your
NAS.
To solve this problem:
1. Log in the Web GUI and go to Configuration Center > Shared folder.
. In the Users page, create your account name and password.
Chapter 8: FAQ (Frequently Asked Questions)
E6146_NAS-M25_Manual.indd 71
71
11/30/10 9:39:44 AM