3.3
Using Configuration Center
Use Configuration Center to run Setup Wizard and configure the advanced settings for
your NAS.
3.3.1
Running Setup Wizard
Use Setup Wizard included in the Web GUI to configure the basic settings for your NAS.
NOTE:
You may install the NAS utilities from the Support CD and run Setup Wizard.
See 2.3 Running Setup Wizard for details.
To run Setup Wizard via the Web GUI:
1. From the navigation pane, select Wizard, then click Run Wizard.
Navigation pane
. Follow the onscreen instructions to complete the wizard.
E6146_NAS-M25_Manual.indd 32
Chapter : Managing your NAS via its Web GUI
11/30/10 9:39:25 AM