Table of Contents
Advertisement
P4 TGQ-M775 BIOS Setup
3.5
C
S
ACHE
ETUP
CPU L1/L2/L3 Cache
Depending on the CPU/chipset in use, you may be able to increase
memory access time with this option.
Enabled (default)
Disabled
3.6
H
-T
YPER
HREADING
This option allows you to enable or disabled CPU Hyper-Threading.
Enabled for Windows XP and Linux 2.4.x (OS optimized for Hyper
Threading Technology. Disabled for other OS (OS not optimized for
Hyper Threading Technology.
The Choices: Enabled (Default), Disabled.
3.7
Q
P
UICK
OWER
Enabling this option will cause an abridged version of the Power On
Self-Test (POST) to execute after you power up the computer.
Disabled
Enabled (default)
3.8
B
U
N
OOT
P
UM
Selects the NumLock. State after power on.
On (default)
Off
3.9
G
A20 O
ATE
PTION
Select if chipset or keyboard controller should control Gate A20.
Normal
Fast (default)
3.10
T
R
YPEMATIC
When a key is held down, the keystroke will repeat at a rate determined by
the keyboard controller. When enabled, the typematic rate and typematic
delay can be configured.
The Choices: Disabled (default), Enabled.
3.11
T
R
YPEMATIC
Sets the rate at which a keystroke is repeated when you hold the key
down.
The Choices: 6 (default), 8,10,12,15,20,24,30.
User's Manual
Enable cache.
Disable cache.
T
ECHNOLOGY
O
S
T
N
ELF
EST
Normal POST.
Enable quick POST.
L
S
OCK
TATUS
Numpad is number keys.
Numpad is arrow keys.
A pin in the keyboard controller controls Gate
A20.
Lets chipset control Gate A20.
S
ATE
ETTING
(C
/S
)
ATE
HARS
EC
12
Advertisement
Table of Contents
