Boot Seq & Floppy Setup; Virus Warning - Biostar I915G-M7 Bios Setup Manual

Biostar i915g-m7 motherboard: supplementary guide
Hide thumbs Also See for I915G-M7:
Table of Contents

Advertisement

P4 TGQ-M775 BIOS Setup
3.3
B
S
& F
OOT
EQ
3.3.1
First/Second/Third/Boot Other Device
These BIOS attempt to load the operating system from the device in
the sequence selected in these items.
The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2,
HDD-3, ZIP100, LAN, HPT370, Disabled, Enabled.
3.3.2
Swap Floppy Drive
For systems with two floppy drives, this option allows you to swap
logical drive assignments.
The Choices: Disabled (default), Enabled.
3.3.3
Boot Up Floppy Seek
Enabling this option will test the floppy drives to determine if they have
40 or 80 tracks. Disabling this option reduces the time it takes to
boot-up.
The Choices: Disabled, Enabled (default).
3.3.4
Report NO FDD for Win95
The Choices: NO (default).
3.4
V
W
IRUS
ARNING
This option allows you to choose the Virus Warning feature that is used to
protect the IDE Hard Disk boot sector. If this function is enabled and an
attempt is made to write to the boot sector, BIOS will display a warning
message on the screen and sound an alarm beep.
Enabled
Disabled (default)
User's Manual
S
LOPPY
ETUP
Virus protection is activated.
Virus protection is disabled.
11

Advertisement

Table of Contents
loading

Table of Contents