Table of Contents
Advertisement
6.4
V
O
M
IDEO
FF
This option determines the manner in which the monitor is goes blank.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS (default)
Initial display power management signaling.
6.5
V
O
I
IDEO
FF
This determines the manner in which the monitor is blanked.
The Choices:
Yes (default), No.
6.6
S
T
USPEND
YPE
Select the Suspend Type.
The Choices:
Stop Grant (default, PwrOn Suspend).
6.7
MODEM U
SE
This determines the IRQ, which can be applied in MODEM use.
The Choices:
3 (default)/ 4 / 5 / 7 / 9 / 10 / 11 / NA.
6.8
S
M
USPEND
ODE
When enabled and after the set time of system inactivity, all devices
except the CPU will be shut off.
The Choices:
Disabled (default), 1Min, 2Min, 4Min, 8Min, 12Min, 20Min, 30Min,
40Min, 1Hour.
6.9
HDD P
OWER
When enabled and after the set time of system inactivity , the hard disk
drive will be powered down while all other devices remain active.
The Choices:
Disabled (default), 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7 Min, 8
Min, 9 Min, 10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15 Min.
I86PE-A7 BIOS Setup
ETHOD
S
N
USPEND
IRQ
D
OWN
24
Advertisement
Table of Contents
