Biostar I86PE-A7 Bios Setup Manual page 20

5.3 S IO D
UPER EVICE
5.3.1 Power On Function
This item allows you to choose the power on function.
The Choices:
Button Only (default), Password, Hot Key, Mouse Left, Mouse Right,
Any Key, and Keyboard 98.
5.3.2 KB Power on Password
Input password and press Enter to set the Keyboard power on
password.
5.3.3 HOT Key power ON
Input password and press Enter to set the Keyboard power on
password.
The Choices:
Ctrl-F1 (default), Ctrl-F2, Ctrl-F3, Ctrl-F4, Ctrl-F5, Ctrl-F6, Ctrl-F7,
Ctrl-F8, Ctrl-F9, Ctrl-F10, Ctrl-F11, Ctrl-F12.
5.3.4 Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC)
installed on the system board and you wish to use it. If install and
FDC or the system has no floppy drive, select Disabled in this field.
The Choices:
Enabled (default), Disabled.
5.3.5 Onboard Serial Port 1
Select an address and corresponding interrupt for the first and
second serial ports.
The Choices:
3F8/IRQ4 (default), Disabled, Auto, 2F8/IRQ3, 3E8/IRQ4,
2E8/IRQ3.
5.3.6 Onboard Serial Port 2
Select an address and corresponding interrupt for the first and
second serial ports
The Choices:
2F8/IRQ3 (default for Version 1.0~6.0), Disabled, Auto, 3F8/IRQ4,
3E8/IRQ4, 2E8/IRQ3.
I86PE-A7 BIOS Setup
19