Table of Contents
Advertisement
Available languages
Available languages
y
y
The test run is successful if:
1. The red LED at the controller goes out permanently.
2. The signal contact 1 "Locked by motor" is closed.
y
y
After a successful test run, the control unit responds to control signals
at input I1 and I2 with a long tone (> 1 s).
y
y
Then remove the service plug from the controller!
y
y
Remove the copper-coloured transport securing device from the latch and deadbolt triggers.
y
y
The motor-driven shoot-bolt lock can now be used.
ISR 15
31
Advertisement
Chapters
Table of Contents
