Advertisement
7. Install S2VR Manager:
1. Double CLICK the application on the
provided CD, CalDigit S2VR v1.0.1.pkg.
2. Introduction Screen, CLICK Continue.
3. Select OS hard drive as the Destination.
4. Installation Successful, CLICK Close.
5. Directory:
OS drive > Applications > Utilities
> CalDigit S2VR > S2VR Manager
6. Drag S2VR to the Launcher.
8. Configuring S2VR Manager:
•
S2VR Manager limits configuration access with
a password prompt. (Default: admin)
•
Go to "Management Tab" setup password,
Voice & E-mail notification.
•
New password must be
5 or more
•
Click the
"Enable Voice
notification" box to
active the S2VR Manager voice notification.
•
Click the
"Enable Email
notification" box and
configure its settings to active S2VR Manager e-
mail notification.
9. Configuring RAID setting:
1. Click on
2. Select and click
Click
IGNORE
3. Go to OS Disk Utility, select S2VR HD and
create Partition or RAID
• CONGRATULATIONS!
characters.
Your S2VR HD is ready to use! Thank you for your
purchase. Please visit us at
updated drivers and information on new CalDigit
products.
"Configure
RAID".
"Create New
RAID".
on the Disk Insertion msg.
www.caldigit.com
for
Advertisement
