Troubleshooting - Billion TA128 User Manual

Error
Indication
"USB" LED is
not lit
or
"Fail" on USB
interface panel
or
The
CAPI2032.DLL
file cannot start.
The B1 LED is
lit upon start-up.
The B2 LED is
lit upon start-up.
You are not
allowed to run
this program.

Troubleshooting

If your tiny USB ISDN TA 128 does not work
properly, run the Diagnostic Program to help
you identify the problem.
Possible
Cause
tiny
1. The
ISDN TA 128 is not
ready.
2. The PC is not
USB-ready.
The RAM is out of
order
The ISDN chip is
out of order
The CAPI2032.DLL
is not from the
ISDN package.
1. Make sure the USB cable is
USB
securely connected to PC or self-
powered USB hub device.
2. Examine your PC's
hardware and software for USB
capability.
Consult your dealer.
Consult your dealer.
Uninstall and then reinstall the
ISDN device.
Chapter 3
Remedy
27