Advertisement
Step by Step Assembly Instructions
Step One
1. Place Table Top (A) up-side-down on a clean, dry & smooth surface that will not scratch the
table top.
2. Attach the Table Legs (B) to the Table Top (A) using Flat Washers (C), and Hex Nut
(D) as shown in diagram below.
3. Fully tighten the nuts with the Spanner (F).
______________________________________________________________
Step Two
1. with the help of another person, carefully turn
the table the right way up, taking care not to
pivot on legs.
2. Place Parasol Hole Plug (E) in central hole
and remove as required to insert parasol.
____________________________________________________________________________
Step Three
1. Ensuring that the table is on a flat even surface
with all 4 legs in contact with the ground, the
table is now ready to use.
3
Advertisement
