Table of Contents
Advertisement
CONTROL PARTS AND FUNCTIONS
Right Handlebar Controls
1.
Starter switch cranks the
starter motor when pushed.
2.
Engine Stop Switch is a
safety device for use in an
emergency such as when the
motorcycle
overturns
or if
trouble occurs in the throttle
system. To start the engine, the
switch must be moved down. In
case of emergency, move the
switch up to stop the engine.
3.
Hazard Switch turns on
flashing hazard lights.
4.
Mode Selector Refer to
page 51 for functions and set-
ting procedure.
Many of these features are used in conjunction with the Set Switch.
D (Clock: Digital from 0 to 12:00 without am/pm indicator, includes icon.
D Odometer: Switchable between miles and kilometers, includes icon, default
startup mode is in miles.
D Trip Odometer: Can be reset to zero, displays miles or kilometers, includes icon.
D Fuel Level: Indicates in 1/10th gallons or liters, no icon.
D High Beam Icon Dimming: 4-bar scale, 3 bars "on" is default, no icon, only HB
text.
D Back Lighting Dimming: 6-bar scale, 4 bars "on" is default, includes icon.
D Charging System Voltage: When engine is running LCD will display charging
voltage (ALT). Battery voltage (BAT) is displayed when engine is not running.
D Diagnostics: ECU fault/engine control fault indicator display is "CK ENG", if en-
gine is not idling the LCD will flash "CK ENG".
2
RH Driver's View
3
4
1
RH Front Side
17
Advertisement
Table of Contents
