Advertisement
VoIP/(802.11g) ADSL2+ Router
Connecting your router
1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone (ADSL) network.
2. Power on the device.
3. Make sure the PWR and SYS LEDs are lit steadily and that the LAN LED is lit.
4. Connect an RJ11 cable to VoIP port when connecting to an analog phone set.
5. Connect RJ-11 cable to LINE Port when connecting to the telephone wall jack
(Wireless Router
with LINE port
only).
VoIP/(802.11g) ADSL Router
(Wireless Router only)
Switching/
HUB
Analog Phone
Connect more
computers
VoIP/802.11g ADSL Router with LINE port
Switching/
HUB
ADSL
Phone
ADSL
Splitter
Line
Analog Phone
Connect more
computers
12
Chapter 3: Basic Installation
Advertisement
