Advertisement
Port
Power Switch
1
PWR
2
3
RESET
LAN
4
1X
—
(RJ-45 connector)
CONSOLE
5
Phone
6
─
1X
2X
(RJ-11 connector)
ADSL
7
Antenna
8
(Wireless Router only)
LINE
9
(Wireless Router with LINE
port only)
Chapter 2: Installing the router
Power ON/OFF switch
Connect the supplied power adapter to this jack.
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is
used when you can not login to the router, e.g. forgot the
password)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
3X
network of 10Mbps or 100Mbps.
Connect a PS2/RS-232 cable to this port when connecting to a
PC's RS-232 port (9-pin serial port).
Connect RJ-11 cable to this port when connecting to an analog
phone set.
Connect the supplied RJ-11 ("telephone") cable to this port when
connecting to the ADSL/telephone network.
Connect the detachable antenna to this port.
Connect RJ-11 cable to this port when connecting to the
telephone wall jack.
VoIP/(802.11g) ADSL2+ Router
Meaning
9
Advertisement
