System Access; File Transfer Over Bluetooth; Send A File From The Orbit Reader - Orbit Reader 40 User Manual

Orbit Reader 40 – User Guide
BraillePanLeft
BrailleEnter
BraillePanRight
BraillePriorLine

System Access

To connect the Orbit Reader 40 to System Access, the device must be
connected by a standard USB-A to Type-C USB cable and set in HID protocol
mode. You must set the Orbit Reader 40 to emulate VarioUltra40 on the menu.
1. Press Select + Up Arrow to open menu
2. Down Arrow to the USB selection
3. Right Arrow to select HID
4. Press Select
5. Press Dot 7 to return to the last location
Another way to quickly switch to HID mode is to use the shortcut keys Space +
Dots 2 7.
After running System Access in HID mode, connect the USB cable and wait for
30 seconds. System Access will announce when the Orbit Reader 40 gets
connected.

19 File transfer over Bluetooth

You can transfer a file from the Orbit Reader 40 to any paired Bluetooth device
over Bluetooth except for iOS and Mac.

19.1 Send a file from the Orbit Reader 40

Go to a file in the file manager and browse to the file you wish to send. Press Space
+ Dots 2 3 4 5 7 command to send the file to the Bluetooth device.
The Orbit Reader 40 opens the list of paired devices. Scroll through device names
from the list using Up and Down arrow keys and press Select.
It shows the progress message "Sending, XXX, YY%", where XXX is a file name,
YY is the percentage. Once the file transfer is completed, it shows the message
"File transfer complete". You can cancel the file transfer by pressing Dot 7. It shows
the message "File transfer aborted". In case, the host device cancels the file
transfer, it shows the message "File transfer canceled".
In case of any error in the file transfer, it shows the "File transfer error".
Orbit Research
Version 1.3
Left Arrow
Select
Right Arrow
Up Arrow
62