Orbit Reader 40 User Manual page 60

Orbit Reader 40 – User Guide
4. Down Arrow to Braille and press Enter.
5. Tab to Add and press Enter.
6. Arrow Up or Down to BAUM VarioUltra 40 and press Space to check the
box and select it.
7. Tab to the Next button and press Enter.
8. Select USB.
9. Tab to the Next button and press Enter.
10. Select BAUM VarioUltra 40 as a primary device.
11. Tab to the Finish button and press Enter.
12. Restart JAWS.
Alternative Steps for connecting over Bluetooth:
1. Press Space + Dots 4 7.
2. Follow steps 1-7 of the USB connection.
3. Select the COM port where the Orbit Reader 40 is connected (check
device manager for COM port or use COM port you saved from previous
steps).
4. Follow steps 9-12 of the USB connection.
To turn off braille support, follow these steps:
1. Insert + J to bring up the JAWS menu.
2. Press Enter on Options.
3. Down Arrow to Braille and press Enter.
4. Up Arrow to No Braille Display.
5. Tab to Ok and press Enter.
6. Restart JAWS.
Note: For a longer description of any of the following commands, turn JAWS
keyboard Help 'on' by pressing Insert + 1 and type the command. Quickly type
the command twice to get an even longer description. Press Insert + 1 again to
exit the JAWS keyboard Help mode.
18.8.4.1 Jaws Commands
JAWSBackspace
BrailleEnter
BraillePriorLine
BraillePanLeft
BrailleNextLine
BrailleToggleCursor
BraillePanRight
RouteBrailleToActiveCursor
Orbit Research
Function Keys
Dot 7
Dot 8
Select + Dot 1
Select + Dot 2
Select + Dot 3
Select + Dot 4
Select + Dot 5
Select + Dot 6
Version 1.3
60