Orbit Reader 40 User Manual page 42

Orbit Reader 40 – User Guide
Edit Current
Space + E Opens the selected file for editing.
File
Switch to Space +
Last Edited Dots 1 2 4
File 6
Add a new
Dot 8
line (Enter)
Delete a
Dot 7
character
Select
Exit Editor twice OR
Select, E
Save current
work Select, S
Go to next or Left or
previous Right
character Arrow
Space +
Go to next or
Left or
previous
Right
word
Arrow
Previous or Pan Up or
next display Down
Previous or Up or
next Down
paragraph Arrow
Orbit Research
Opens the last edited file for further editing. The
device displays the error message "-- File not found"
if the file has been deleted.
Pressing Dot 8 adds a new line (enters a carriage
return) at the end of a paragraph and places the
editing cursor in the first cell of the next paragraph.
Pressing Dot 7 deletes the character to the left of the
editing cursor.
When you close a file, Editor saves and returns to
the Reader or File Manager, depending on your
earlier location. It automatically saves your work.
If you have opened the file from File Manager, File
Manager makes the new file the current item in the
list.
If you edit an existing file, Reader moves the reading
position to the place where the cursor was.
The Orbit Reader 40 automatically saves files every
1 KB of data or about 1000 characters, as you edit.
However, small file increments could be lost during
certain situations such as SD card removal, system
updates, or device resets. Pressing Select, S saves
the file as you deem necessary.
Pressing Left or Right Arrow moves the cursor to the
previous or next character.
Pressing Space + Left or Right Arrow moves the
cursor to the start of the previous word or next word.
This is also used to navigate between digits.
Pressing Up or Down on the Panning rocker keys
allows you to move to the previous or next display of
braille. If you press the bottom part of the rocker key,
the display pans forward. If you press the top of the
rocker key, the display pans backward. The editing
cursor is placed at the first cell. See
section for more information.
Pressing the Up or Down Arrow moves the editing
cursor to the start of the previous or next paragraph.
If the start of the previous or next paragraph is not on
the display, then the display pans to the start of the
previous or next paragraph to the first cell on the
display. The editing cursor is placed in the first cell.
Version 1.3
Panning Keys
42