Air Filter - PROCONCEPT PLG375 Operator's Manual

20” 2-in-1 gas rotary push mower
Table of Contents

Advertisement

Available languages

Available languages

MAINTENANCE
SPARK PLUG (FIG. 10)
1. Once the engine has cooled, remove the spark plug using the box spanner
supplied.
2. Clean the plug with a wire brush.
3. Using a feeler gauge (not included) set the gap to 0.75 mm (0.030").
4. Refit the spark plug taking care not to over-tighten.
Fig. 10

AIR FILTER

1. Unclip the air filter cover and remove the sponge filter element.
2. To avoid objects falling into the air intake, replace the air filter cover.
3. Wash the filter element in warm soapy water.
4. Rinse and allow filter element to dry naturally.
!
IMPORTANT: Never run the engine without the air filter element installed.
CHANGING THE OIL (Fig. 11)
The oil drain plug is located under the oil filter as shown.
1. Tilt the lawnmower towards the filler, have a container ready to catch the oil.
2. Remove the oil drain plug.
Oil Drain Plug
3. Once the oil has been emptied, replace the oil drain plug making sure that the
washer is in place.
4. Wipe clean any spillages.
5. Refill with 600 ml of SAE30 oil.
Fig. 11
6. When the dipstick is rested on the filler pipe (i.e. not screwed in place), the oil
level must be between the min and max marks on the Dipstick. See "Filling
with Oil" on Page 6.
7. Do not overfill.
8. Start the engine and allow it to run briefly.
9. Stop the engine, wait a minute and check oil level.
10. Top up if necessary.
STORAGE
WARNING: Gasoline left in the fuel tank over the winter period will become stale
!
and the engine will not start.
For long term storage and at the end of the season, the gas tank should be
drained. To drain the gas tank:
1. On the last refueling of the year, add fuel stabilizer to the fuel as directed by the
engine manufacturer.
2. Start the mower and run until it stops.
3. Try restarting the mower. If the mower does not start, the engine is dry.
IMPORTANT: Do not store gasoline for long periods of time. Dispose of excess
gasoline in an environmentally safe way. Your recycling centre can advise
!
you on the best method of disposal. Make sure that the lawnmower has been
thoroughly cleaned before storing it in a clean dry place.
If your tool requires service, ask your retailer or call us at 1-888-267-7713 for an
!
authorized repair centre in your area.
11
v.080227

Advertisement

Table of Contents
loading

Related Products for PROCONCEPT PLG375

Table of Contents