General Maintenance; Maintenance Schedule - PROCONCEPT PLG375 Operator's Manual

MAINTENANCE
Before starting any cleaning or maintenance routines on the lawnmower, confirm
that the engine is switched off and the spark plug cap is disconnected and moved
away from the spark plug.
CLEANING
To ensure the best performance from your lawnmower, it is important to keep it
clean. Always clean your lawnmower immediately after use. Do not allow grass
cuttings and other debris to become dry and hard on any of the lawnmower
surfaces. This will directly affect the cutting and grass collection performance.
Make sure that the underside of the lawnmower deck is cleaned and clear of all
grass cuttings. Ensure that the grass discharge chute and grass discharge flap are
clean and clear. The grass box must always be emptied after use and the interior
cleaned and cleared of all grass cuttings. Make sure that the exterior of the engine
is clear of all clippings, cuttings, and dirt.

GENERAL MAINTENANCE

Make sure that all nuts, bolts and screws are kept tight and secure. Always have
any damaged or worn parts repaired or replaced. Check the blade and the engine
mounting bolts at regular intervals. The front and rear wheel spindles should
be lubricated periodically with light lubricating oil. Always have your lawnmower
inspected and maintained by a qualified service facility. The engine and its
components should be regularly serviced by qualified personnel.

MAINTENANCE SCHEDULE

12 Hours of Use
Air filter Clean
Spark plug Not applicable
Engine oil Check
24 Hours of Use
Air filter Clean
Spark plug Clean
Engine oil Replace
36 Hours of Use
Air filter Clean
Spark plug Clean
Engine oil Check
10
PLG375b