Table of Contents
Advertisement
Available languages
Available languages
EN
Read installation and operating instructions in their entirety
before installing the connection fitting
Installation, initial operation, operation and maintenance
must only be carried out by qualified tradesmen
The installation and operating instructions, as well as other
valid documents must remain with the user of the system
Inhalt:
1
General information .................................................... 3
2
Safety notes................................................................ 3
3
Transport, storage and packaging.............................. 4
4
Technical data............................................................. 4
5
Construction and function .......................................... 4
6
Installation ................................................................. 4
7
Operation .................................................................... 4
8
Accessories ............................................................... 4
9
Maintenance ............................................................... 4
10 Warranty ..................................................................... 4
11 Diagrams / Installation example ................................. 7
Illustr. 1.1 "Flypass 4TZ"
1 General information
1.1 Information regarding installation and operating in-
structions
These installation and operating instructions serve the installer
to install the connection fitting professionally and to put it into
operation.
Other valid documents – manuals of all system components
as well as valid technical rules – must be observed.
1.2 Keeping of documents
These installation and operating instructions should be kept
by the user of the system.
For an overview of our global presence visit
www.oventrop.com.
Installation and operating instructions for the specialised installer
1.3 Copyright
The installation and operating instructions are copyrighted.
1.4 Symbol explanation
Safety guidelines are displayed by symbols. These guidelines
are to be observed to avoid accidents, damage to property
and malfunctions.
situation which, if not avoided, will result in death or serious in-
jury.
situation which, if not avoided, could result in death or serious
injury.
situation which, if not avoided, may result in minor or moderate
injury.
2 Safety notes
2.1 Correct use
Safety in operation is only guaranteed if the connection fitting
is used correctly.
The connection fitting "Flypass 4TZ" is installed in heating and
cooling systems with closed water circuit (e.g. central heating
systems, fan coil units, chilled ceilings, fan convectors etc.).
Any use of the connection fitting outside the above applications
will be considered as non-compliant and misuse. Claims of
any kind against the manufacturer and/or his authorised re-
presentatives due to damages caused by incorrect use cannot
be accepted.
The observance of the installation and operating instructions
is part of the compliance terms.
2.2 Possible dangers at the installation location
The case of an external fire has not been taken into conside-
ration when constructing the connection fitting
Installation
Risk of injury Suitable transport and lifting devices are to
be used. Wear suitable protective clothing during installation
and use safety devices. External components like handw-
heels or pressure test points must not be misused for the
absorption of external forces, e.g. as connection point for
lever tools etc.
Hot and cold surfaces
Risk of injury
nection fitting can get very hot during operation.
Allergies
Health hazard Do not touch the control station and avoid
any contact if allergies against the used materials are known.
Valves, controls + systems
"Flypass 4TZ" Connection fitting
DANGER
DANGER indicates a hazardous
WARNING
WARNING indicates a hazardous
CAUTION
CAUTION indicates a hazardous
NOTICE
WARNING
Only touch with safety gloves. The con-
Subject to technical modifications.
114950480
.
11/2016
3
Advertisement
Table of Contents
