Specifications - Ellisys USB Explorer 200 Getting Started Manual

Specifications

Enclosure
• Width: 150 mm (5.91 inches)
• Length: 120 mm (4.72 inches)
• Height: 65 mm (2.56 inches)
• Weight: 750 g (1.7 pounds)
Analysis Computer connector
• USB 2.0 high speed (480 Mbit/s)
Link Under Test connectors
• USB 2.0 high speed (480 Mbit/s), full speed (12 Mbit/s) et low speed
(1.5 Mbit/s)
• Automatic speed discovery of Device Under Test
Trigger connector
• Type: BNC
• Input: 5 V max, 1 Mohms
• Output: 3.3 V, max 20 mA
• Absolute maximum ratings: -0.5 V .. +6.5 V, 50 mA
Indicators
• Power: lights up when the analyzer in powered on
• Activity: lights up in green when packets are detected (in red when they are
recorded)
• Trigger: lights up in green when a trigger is detected in input (in red when
detected in output)
Memory
• 32 MBytes of FIFO memory
• Analyzed data is transmitted continuously
Bus analysis
• Timestamp: 16.67 ns (60 MHz) precision
• Low-level errors: detection of bit-stuffing, CRC5 and CRC16 errors
• Bus states: detection and measurement of Reset, Suspend, Keep Alive and High
Speed Handshake states
Power Requirements
• Powered by the USB bus of the Analysis computer
• No external power supply needed
USB Explorer 200
Version 2.0.3
User's manual
February 13, 2006
Page 13 of 17