Technical Data; Guarantee - AEG MC 4407 CD/MP3 Instruction Manual & Guarantee

Stereo music center
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 38
FOLDER- (4 on the remote control)
Press this button during playback to change to a folder further
down. The display, e.g. ALBUM 01, fl ashes briefl y. Then the CD
begins to play back automatically.
FOLDER+ (4 on the remote control)
Press this button during playback to change to a higher folder.
See the above paragraph for the following step.
Note: Some keys are to be found both on the device itself
and on the remote control. Keys with the same designation
have the same function.
Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the STOP key (17/2).
2. Press the PROGRAM key (18/6). „P01" (memory location)
appears in the display (13) together with the abbreviation
PROG. Use the SKIP+/SKIP-/FF+/FF- buttons (15/16/3)
to select the desired track and then press the PROGRAM
button (18/6) again. The display changes to memory slot
P02.
3. Select the next track with the SKIP+/SKIP-/FF+/FF- key and
press the PROGRAM key again. Repeat the procedure until
all the desired tracks are selected.
4. Press the PLAY/PAUSE key (14/1). The playback starts.
The selected track numbers are shown in the display in the
correct order and the symbol
up. Press this button to pause briefl y the playback.
5. If the STOP button (17/2) is pressed, playback is stopped
and the programme deleted. The abbreviation PROG goes
off.
The device stops automatically once the entire sequence of pro-
grammed tracks is completed. The abbreviation PROG goes off
and the programmed order of tracks is deleted from the memory.
It is also possible to combine the programmed tracks with the
REPEAT function. After you have programmed and started the
device, please press the PLAY MODE button (19/5) up to three
times and then you can use the functions as described under
"PLAY MODE".
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play one
of these CDs, proceed as described under „Playing CDs/MP3".
Tracks can be programmed as described under „Playing Back
Programmed Tracks".
05-MC 4407 CD AEG 41
or
MP3 and PROG light
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fi xed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not a
malfunction of the device.
Cleaning and Maintenance
Always remove the mains plug before cleaning the machine.
Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.

Technical Data

Model:............................................................MC 4407 CD/MP3
Power supply: ........................................................ 230 V, 50 Hz
Output rating:........................................................ 100 W PMPO
Protection class: ...................................................................... ΙΙ
Radio section:
Frequency ranges: ...................VHF / FM 87,5 ~ 108,0 MHz
....................... MW / AM 535 ~ 1650 kHz
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a 24 month
guarantee starting on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its ac-
cessories *) ascribable to material or manufacturing defects will
be eliminated free of charge by repairing or, at our discretion, by
replacing it. The guarantee services do not entail an extension
of the life of the guarantee nor do they give rise to any right to a
new guarantee!
Proof of the guarantee is provided by the proof of purchase.
Without proof of purchase no free replacement or repair will be
carried out.
If you wish to make a claim under the guarantee please return
the entire machine in the original packaging to your dealer
together with the receipt.
*) Damage to accessories does not mean automatic free re-
placement of the whole machine. In such cases please contact
our hotline. Broken glass or breakage of plastic parts are always
subject to a charge.
41
24.03.2006, 10:02:56 Uhr

Advertisement

Table of Contents
loading

Table of Contents