Technical Data; Guarantee - AEG MC 4413 CD/MP3 Instruction Manual & Guarantee

Use the I SKIP/TUNING
buttons (8/3/4) to select the desired track and then press the
MEM(ORY)/PROG(RAM) button (10/6) again. The display
changes to memory slot P-02.
3. Select the next track with the I
I (SKIP DOWN/UP) key and press the MEM(ORY)/
PROG(RAM) key again. Repeat the procedure until all the
desired tracks are selected. In MP3 format fi rst select the
folder. Press the MEM(ORY)/PROG(RAM) button and then
select the desired track.
4. Press the II ENTER/PLAY/PAUSE key (14/1). The
playback starts. The fi rst track number selected appears in
the display. The words „CD", „MP3" and „PROG" appear in
the display. Press this button to pause briefl y the playback.
5. Press once the STOP key (17/2) to stop the playback
while retaining the program. The PROG control lamp goes
out.
6. To resume the playback of the program press fi rst the
MEM(ORY)/PROG(RAM) key once and then the
ENTER/PLAY/PAUSE key.
7. To delete the program (in stop mode) fi rst press the
MEM(ORY)/PROG(RAM) button and then the
button.
The device stops automatically once the entire sequence of
programmed tracks is completed. The PROG control lamp
goes out. The programmed order remains in the memory until
you change to a different mode, remove the CD from the CD
compartment, switch the device off or to standby mode.
It is also possible to combine the programmed tracks with the
REPEAT function. After you have programmed and started the
device, please press the REPEAT/PRE-UP button (16/5) up to
three times and then you can use the functions as described
under „REPEAT".
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play one
of these CDs, proceed as described under „Playing CDs/MP3".
Tracks can be programmed as described under „Playing Back
Programmed Tracks".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fi xed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not a
malfunction of the device.
05-MC 4413 AEG 65
I (SKIP DOWN/UP)
•
•
SKIP/TUNING
Model: ........................................................... MC 4413 CD/MP3
Power supply: ........................................................ 230 V, 50 Hz
Output rating:........................................................ 100 W PMPO
Protection class: ...................................................................... ΙΙ
Radio section:
II
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
STOP
the latest safety regulations.
Subject to technical changes without prior notice!
The device supplied by our Company is covered by a 24 month
guarantee starting on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its
accessories ascribable to material or manufacturing defects will
be eliminated free of charge by repairing or, at our discretion, by
replacing it. The guarantee services do not entail an extension
of the life of the guarantee nor do they give rise to any right to a
new guarantee!
Proof of the guarantee is provided by the proof of purchase.
Without proof of purchase no free replacement or repair will be
carried out.
If you wish to make a claim under the guarantee please return
the entire machine in the original packaging to your dealer
together with the receipt.
Defects to consumables or parts subject to wearing as well as
cleaning, maintenance or the replacement of said parts are not
covered by the guarantee and hence are to be paid!
The guarantee lapses in case of unauthorized tampering.
After the expiry of the guarantee repairs can be carried by the
competent dealer or repair service against the payment of the
ensuing costs.
Cleaning and Maintenance
Always remove the mains plug before cleaning the machine.
Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.

Technical Data

Frequency ranges: .............................FM 87,5 ~ 108,0 MHz
................................ AM 522 ~ 1620 kHz

Guarantee

After the expiry of the guarantee
65
04.07.2007, 14:23:34 Uhr