Scandomestic MWP 35 User Manual page 45

How to remove and install the
Warning:Before remove and install the oil blockage,
appliance from the power supply,and
thumb pressed here
1 hands with oil blockage ,pressed on
arrow shown,pushed back slamly, then
pulling down.
2.status of remove
3.taking oil blockage
oil blockage
the
from the appliance.
be sure to unplug the
avoid high temperature scald.
1.Hands to take the oil
three cylinder of the oil
the three holes of the back plate.
2.The left hand grasp the microwave, right thumb to
press the arrow directions and forced to push back .
And the left thumb hard pressed upword at the
same time. put the right of oil blockage
the buckle of the front plate
3.From right to left, make the oil
W hen finish, check to ensure that
buckle completely go.
20
blockage ,after alignment
blockage , inserting
thumb pressed here
into
.
blockage loaded.
the oil blockage