Scandomestic MWP 35 User Manual page 40

8. End of Cook Cycle Mode
1) After the time has expired in a Manual Cook Mode, or a Preset Program Cook
Mode, the oven shall go into The End of Cook Cycle Mode.
2) During this mode, "DONE" displays.
3) If User Option OP:11
(or User Option OP:12 is selected , the oven shall ound 5 quick beeps, repeat
until the user acknowledges this by either opening and
" "
pad. If User Option OP:10 is selected, after the 3
"DONE" . After the beep, the screen will display "READY" . If there is no operation for a period
of time, the oven shall go
9. Preset Program Cook Mode
1) This mode allows cooking of food items through a one pad touch operation.
While in Ready Mode,pressing one of t
the oven to run the Preset Program associated with that key.
2) During this mode,
cooking, the total remaning cooking time displays not a particular stage cooking time.
3 ) When cooking program finish, the oven will enter End of Cook Cycle Mode.
If you press "
10. On the Fly Cooking
1) While the oven is cooking, if User Option OP:51 is selected,press number
buttons, the preset cooking program will start automatically.
2) The screen displays the remaining cooking time.
3) When cooking program finish, the oven will enter End of Cook Cycle Mode.
is selected, the oven shall continue to sound
into Idle Mode.
the screen displays the remaining cooking time. If it is multi-stage
" button under this mode,the oven will enter Pause Mode.
s
closing the door or pressing the
second beep, the screen will display
en digit keys on the keyboard will cause
15
ly )