Service Mode; Factory Default Setting - Scandomestic MWP 35 User Manual

14. User Option Mode
This allows the user choose between various ways for the oven to operate.
1) Open the oven door and press "2" pad for 5 seconds. The buzzer sounds once and enter
this mode.
2) The screen displays "OP: - -".
3) Press any number button to enter related mode setting.
For example: to set the voice of the buzzer to medium. Press " 2 ", "OP:22" displays.
If you want to change, keep pressing "2",
"OP:23", "OP:20" .....in cycle.
4) Press " " to save the current setting. After saved, "OP: - -" display again.
5) During setting process, press "
Ready Mode.
6) If " " button not pressed at the last step, the program cannot be saved but stay at
previous way.

15. Service Mode

1) Open the oven door and press "3" pad for 5 seconds to enter service mode.
2) The screen displays "SE
3) To check the times of closing or opening the door, just press number button "3",
the screen will display the times.
4) If press " 1 " pad for Tube Hours.
If press " 2 " pad for Tube Cycles.
If press " 3 " pad for Door Cycles..
If press " 4 " pad to Clear service information.
Only for some medels:
If press " 5 " pad to run Top Mag. Oven displays amps.
If press " 6 " pad to run Bottom Mag. Oven displays amps.
5) Press " " to enter Door Open Mode. Close the door will enter Ready Mode.
16. Factory-default setting
In the Ready Mode,pressing "
1) Press " " and " 0 ", the buzzer sounds once,and the screen wil l display "CHECK" . I f i t is
in the f actory-default setting,
to the ready m ode
If not in t he factory-default setting,the screen will display " 00 ", pr e ss"
setting, the screen
will d isplay " 11 or " "
2) If do not press "
Note: Be careful in the
" to enter Door Open Mode. Close the door will enter
RVICE ".
" an " 0 " to factory-default setting.
the screen
.
will display " CLEAR ".
00 . "
" when the screen
operation as it will
the screen displays "OP:20", "OP:21","OP:22",
d
will display " 11 " ,after three seconds,
the buzzer sounds once,
display " 00 ",the setting will cancel 10 after seconds.
restore all configure to f
18
the oven
" to the factory-default
after self-testing, the screen
actort-default setting
turn
.