Scandomestic MWP 35 User Manual page 42

12. Double Quantity cooking
1) Through the use of the X2 pad, the user can easily set the time two of a particalar
food item.
2) If the "X2" button is pressed in ready mode, followed by the starting of a Preset Program,
or if the "X2" button is pressed in 5 secondes of starting a Preset Program, the oven will
start cooking with the quantity preset cooking time.
3) Press "X2", "DOUBLE" displays. When press number buttons, the screen will display the
quantity preset time.
For example, number button "5" and its preset time is 1 minute. Then press "X2", then time
will change to 1:00*(1+0.8)=1:48(1 minute and 48 seconds)
4) When cooking program finish, the oven will enter End of Cook Cycle Mode.
13. Stage Cooking Programming
This allows the user to cook food items at
1) Three stages can be set at most under cooking mode or programming mode.
Aftet setting the power and time for the first stage, press " Time Entry " to set the second stage.
And the same step to set the third stage.
2) When setting the second, third stage, press " Time Entry", "STAGE 2","STAGE 3"
displays.
3) Press " " button to start cooking.
Example: In programming mode,
The first stage is PL7 and time is 1 minute 25 seconds. The second stage is PL5 and
5 minutes and 40 seconds. The steps are as follows.
a. Open the door ,p
b. Press number button "3", the screen will display "P:03", two seconds later,
the screen will display the
c.Press "1","2","5" to input the cooking time. "1:25" displays.
d. Press "Med-Hi 70% ", "
The first stage is finished.
e.
Press " Time Entry", "STAGE 2" displays.
f. Press "5", "4","0" button, "5:40" displays.
g.Press " Medium 50% ", "
The second stage is finished.
h. Press " " button to start cooking.
i .The total time cout s down.
press number buttons " " 3 to
ress number button "1" for 5 seconds,"PROGRAM" displays.
related
1:25 70" displays.
-
5:40 50 " displays.
n
manual cook mode and program ing m de.
time " :30 " .
17
m
-
set t wo cooking stages
o
-
.