Bosch Rexroth BA1N Operating Instructions Manual page 16

2/49
About this documentation
Symbol
Bosch Rexroth AG R911393267_Edition 01
CAUTION
Non-compliance with this safety instructions can result in moderate or minor
personal injury.
NOTICE
Non-compliance with this safety instructions can result in material damage.
Symbol Meaning
Reference to supplementary documentation
This note gives important information, which must be observed.
Single, independent handling step
1.
numbered instruction:
2.
The numbers show that the action steps must be taken one after the
other.
3.
Warning against dangerous electric voltage
Warning against hot surfaces
Warning against rotating machine parts
Warning against overhead load
Electrostatic sensitive devices
Prohibition for persons with cardiac pacemaker
Do not carry along metal parts or clocks
Hammer scales are forbidden
The UL Recognized Component Mark identifies recognized compo‐
nent parts which are components of a bigger product or system
The letters "C" and "E" stand for "Communautes Européennes". The
CE-marking expresses the conformity of a product with relevant EC-
regulations.
Conformity with the Low Voltage Directive 2006/95/EC, DIN EN
60034-1, DIN EN 60034-5 is confirmed for BA1N energy storage de‐
vice.
SI
Components for the use in systems for "integrated safety technique"
prepared.
Tab. 1-3: Meaning of symbols
BA1N Kinetic Energy Buffer