Aguila+ Button Programming; Alerts/Notifications - Nespresso Aguila 220 User Manual

Menu Settings

- AGUILA+ button programming

Alerts/Notifications

What if a "Call technician"
message appears?
Please call your Nespresso
representative.
AGUILA+ button programming
The AGUILA+ button offers
the choice of 13 one-touch
milk-based coffee recipes.
To select the one-touch
recipe you would like to
be dispensed when the
AGUILA+ button is pressed,
follow the instructions
below. You can change your
selection at any time by
repeating the same steps.
Press Rinse button for 3
seconds
AGUILA+
◄ LATTE ►
Select the desired product.
Enter
Exit menu
Description Display message
Change water filter
Service required
Milk container
Ready
empty
Milk container empty / Top up milk
Milk level low
Ready
Automatic rinsing
Rinsing in progress
mode
(5-minute delay)
Cleaning required
Ready
in x.yy h.
Cleaning required in x:yy h
Milk system clean-
Ready
ing required
Cleaning required
AGUILA+ recipes
CORTADO LUNGO
CORTADO
FLAT WHITE
CAPPUCCINO LUNGO
CAPPUCCINO CHIARO
CAPPUCCINO FREDDO
ICED CAPPUCCINO
LATTE GRANDE
LATTE
LATTE PICCOLO
ICED LATTE
MACCHIATISSIMO
COLD MILK
►See Nespresso Grand Cru
recommendation on page 3 .
LED status
Change water filter
Ready
Alternating
Service required
Ready
Alternating
Alternating
Milk level low
Alternating
Please wait
Alternating
Alternating
Remarks
Immediately call your Nespresso
representative.
Immediately call your Nespresso
representative.
Milk products are locked.
Fill up milk container (in fridge).
Indicates that the milk container
will soon be empty.
Fill up milk container (in fridge).
Automatic rinsing of internal milk
system starts 5 minutes after last
milk-based beverage preparation.
"Rinsing in progress" and "Please
wait" appear on display. LEDs start
to flash 10 seconds before rinsing.
When the timer ends, the machine
will be locked until cleaned.
Milk products not available.
Start the cleaning procedure as
described on ► page 14 .
EN
17