Table of Contents
Advertisement
Section 2: Installing the Software
Minimum System Requirements for I/O Software's SecureSuite® XS Workstation
Authentication Software
• Microsoft® Windows® 2000 SP1 or
• Microsoft Windows XP Home Edition or Professional operating system
• Pentium® III-450 processor or equivalent
• 128 MB RAM
• 30 MB of free hard disk space
• Communication protocol, i.e. TCP/IP installed
• Microsoft Internet Explorer 4.x
Installation
IMPORTANT: You must be an administrator or have administrative rights on your
computer in order to install the SecureSuite XS Workstation software.
IMPORTANT: If you logon to a domain and are a domain user, SecureSuite XS
Workstation will not allow you to logon using the Puppy® device without SecureSuite XS
Server present on the domain (you can still logon with a password). In order to use this
software, you will need to have a local machine account.
IMPORTANT: Prior to running the installer, please verify that you have at least one network
client installed on the target system. If you are able to access the Internet or a network, you have
a network client. This can be verified by viewing the properties of any available connection in
Network Neighborhood or My Network Places by right-clicking the connection icon and
selecting Properties. You should see Client for Microsoft Networks (or something similar).
Before installing SecureSuite XS Workstation, close all applications and
scanning and detection
1. Insert the SecureSuite XS Workstation CD into your CD-ROM drive. Wait for the
installation to start automatically.
2. If the software does not auto-initiate:
• Select Start from the taskbar and then click Run.
• Type D:\Setup.exe (where D is the drive letter for your CD-ROM drive or other
source media) and follow the onscreen instructions to begin the installation
process.
3. Follow the onscreen prompts. When the installation program asks for your Product
License Key, enter the code printed on the label attached to the CD envelope.
*
If the Client is not present, click the Install or Add button, then select Client and press OK. The list of available
clients will then be available. We highly recommend that you select Client for Microsoft Networks. If no
connection is available or established, please contact Sony or your administrator.
Training Your Puppy® Unit
software.
*
turn off your virus
Page 7
Advertisement
Table of Contents
