Program Mode; Shutter Speed-Priority Mode - BenQ DC C50 User Manual

BenQ DC 5530 User's Manual
3.2. Program Mode [ P ]
The camera automatically adjusts the shutter speed and the aperture value according to
the brightness of an object. It is possible to change the white balance, the metering system
and exposure compensation in program mode.
1. Set the mode dial to [P] and power on the camera.
2. Compose the picture.
3. Press the shutter button down halfway, and press it
down fully.
Program/TV/AV/Manual/Portrait/Sports/Night scene mode:
Mode dial setting
Mode dial setting
Macro
Macro
Preset white
Preset white
balance
balance
Metering
Metering
Exopsure
Exopsure
compensation
compensation
3.3. Shutter Speed-priority Mode [ TV ]
In this mode, photographs are taken with the priority given to shutter speed. The camera
automatically sets the aperture value according to the shutter speed.
A fast shutter speed produces a photograph that looks as if a moving subject is still.
A slow shutter speed produces as photograph that makes you feel that it is flowing.
1. Set the mode dial to [ TV ] and power on the camera.
2. Rotate the Command dial to adjust the shutter speed.
3. Compose the picture and press the shutter button down
halfway,then press it down fully.
•
If the appropriate combination cannot be set even if the aperture is adjusted to
its limit, the aperture value is displayed in "red".
21
Using the DC C50
Zoom state
Shutter speed Aperture
Shutter speed Aperture
Note
Voice icon
Battery condition
Battery condition
Flash light status
Flash light status
Picture size
Picture size
Picture quality
Picture quality
Self-timer
Self-timer
Possible number
Possible number
of shots
of shots