Advertisement
Removal of the Overhead Display Unit.
The hockey table should now be carefully lifted onto its side (the end with the coin door
will be to your left, the end with the service door to your right). Have two people tilt the
table from the ends, do not lift from one side. The table could land on you and cause
injury if you lose your grip while lifting the table from its side.
With the table on its side, you can see the four 5/16" bolts securing the Overhead Display
Unit to the underside of the table. Use the ratchet, 12" extension and ½" socket, take care
not to damage the fluorescent light bulbs in the fixture, and remove the four bolts to free
the Overhead Display Unit. Carefully store the Overhead Display Unit for later use. The
attachment bolts will not be needed again.
Set the table back down, still
using the box bottom as a base.
Note four attachment bolts at center,
light bulbs to either side in
protective cardboard.
9
Advertisement
