Telestar Imperial CAR 1 Operating Manual, Installation Instructions page 63

6. INSTALLATION AND CONNECTION
1
Disconnect the negative terminal of the car battery.
2
Insert the mounting frame into the vehicle's dashboard unit.
To secure the mounting frame, bend the pins with a screwdriver at
appropriate points on the frame so that the mounting frame sits
securely in the vehicle's dashboard unit.
3
Connect the vehicle wiring harness to the radio
For some vehicle manufacturers, the A4 (clamp 30 perma-
nent plus) and A7 (clamp 15 ignition plus) may be reversed.
If this is the case, the radio will lose any set programme me-
mory slots whenever the ignition of the vehicle is switched off.
In this case, please contact your vehicle service partner or a
specialised dealer for
car stereo accessories.
63
E
IMPERIAL CAR 1 /CAR 2