Sd Track Repeat; Aux - Telestar Imperial CAR 1 Operating Manual, Installation Instructions

5. OPERATION
If there are multiple folders of audio files on the USB disk,
you can use the buttons 5 or 6 (16 / 17) to select the previous or next folder.

5.7.2. SD track repeat

You can automatically repeat a selected track.
> To do this, press the button 3 RPT (14).
The selected track will now be repeated continuously.
To turn off the repetition, press the button 3 RPT (14) again.

5.8. AUX

If you use an external device (e.g. MP3 player) to connect to the radio via cable with the AUX in input,
this can be used as an option for audio data playback.
To do this, please follow these steps:
> Using an appropriate cable (3.5mm jack, sold separately - may vary from device to device), connect an external device via the jack (19).
> Press the MOD button (2) repeatedly until AUX is displayed.
Now you can play music from the external device. The control (track forward, back, stop, play)
is done via the externally connected device; the playback volume can be changed
via the volume control on the radio (3) or the volume control of the connected device.
57
FOLD 03
SD
RPT
01 00:08
SD
AUX
IMPERIAL CAR 1 /CAR 2
E