Before First Use; Indicator Lights; Getting To Know Your Electric Pressure Cooker; Less,Normal,More Indicator Light - Mistral MPRC601B Instruction Manual

Indicator Lights

1.Heating indicator light
The indicator light illuminating means the
appliance is in heating status.
2.Keep Warm indicator light
The indicator light illuminating means the
appliance is in Keep warm mode after the
cooking mode is completed.

3.Less,Normal,More indicator light

The corresponding indicator light illuminates
depending on your selection and volume of rice
to be cooked, e.g less cooking time required for
smaller volume, longer cooking time required for
larger volume.
Press "RICE" Button repeatedly to select either of
the three settings.
Getting To Know Your
Electric Pressure Cooker
Congratulations on the purchase of your new
Pressure Cooker.
Before using your new Pressure Cooker, it
is important that you read and follow the
instructions in this Use and Care booklet, even
if you feel that you are quite familiar with this
type of appliance. Find a place to keep this
booklet handy for future reference. Attention is
particularly drawn to the section dealing with
"IMPORTANT SAFEGUARDS".
This appliance has been designed to operate
from a standard domestic power outlet. It is not
intended for industrial or commercial use.
Before First Use
Remove any packaging materials and
promotional labels from your electric pressure
cooker.
Be sure all parts have been included before
discarding any packaging materials. You may
want to keep the box and packing materials for
use at a later date.
Please tear off the protective film on cover the
control panel in before first time use.
Before using your Electric Pressure Cooker for
the first time, remove any dust from shipping
by wiping clean with a damp cloth. Thoroughly
clean the lid and the cooking pot. The cooking
pot can be cleaned in the dishwasher or with
warm soapy water.
Rinse with clean water, towel or air dry, and
place into the pressure cooker.
1. Place the pressure cooker on a clean, flat
surface where you intend to cook.
2. Place the condensation collector in rear of
the unit until it clicks into place.(Fig1).
Fig.1
3. Place the pressure limit valve on the lid steam
vent nozzle, ensuring it seats securely.
Note: The pressure limit valve does not
click or lock in to place. Even though it
will have a loose fit, it is safely secured.
4. Set the pressure release control ring under
the lid handle by turn the tab to the 'Seal'
position.(Fig.2)
Fig.2
7