Unpacking; Parts Description; Operating Instructions - PRO-PULSE N1F-GT-250/3.0-C Operator's Manual

!
C
D

UNPACKING

Check immediately whether all parts and accessories are included. If anything
is missing, or broken, contact our Customer Service at 1-866-206-0888.
PACKAGING INCLUDES:
--grass trimmer
--safety guard
--auxiliary handle and tightening bolt

PARTS DESCRIPTION

1. On/off Switch
2. Cord sleeve
3. Cord hook
4. Cord & plug
5. Auxiliary handle
6. Upper handle shaft
7. Lower handle shaft
8. Cooling vent
9. Safety guard
10. Cooling fan
11. Spool
12. Trimmer head

OPERATING INSTRUCTIONS

ASSEMBLY Ensure during assembly that the power cable is not squeezed and
that it has sufficient play.
Advice
Observe correct mains voltage: The voltage of the power source must match
the voltage specified on the nameplate of the unit.
Assemble the unit
1. Place unit on a flat surface.
2. Push the upper half frame into the lower one each other as the following
picture, until they are tightly connected.
Assemble the auxiliary handle
1. Place your handle on the tool as shown.
2. Adjust handle to the most comfortable position.
3. Pass the handle knob bolt through auxiliary handle. Screw the handle
knob bolt into the captive nut on the far side of the auxiliary handle.
16