Member's Mark Teak Adirondack Assembly Manual page 2

Important Safety Information
·
Please read all instructions carefully before assembling this furniture.
·
For your safety, assembly by two or more adults is strongly recommended.
·
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
·
Hardware may loosen overtime. Periodically check that all connections are tight.
Before Assembly
·
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
·
The shipping box provides an ideal work surface.
·
To avoid accidentally discarding small parts or hardware, do not dispose of any
packaging or contents of the shipping carton until assembly is complete.
·
Use the parts and hardware lists below to identify and separate each of the
pieces included.
·
The use of power tools for assembly is not recommended. Power tools can
damage the hardware and/or split the wood.
·
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow
these instructions may cause the bolts to misalign during assembly.
Care and Cleaning
·
To increase the item lifespan, avoid leaving the furniture in standing water or
indirect contact with wet ground.
·
Cover or move the furniture into covered storage during inclement weather and
during winter months.
·
Clean periodically with soft flannel cloth, slightly dampened with a mild soap
solution and warm water. DO NOT use abrasive material, bleach or scouring
products. Dry thoroughly with soft cloth.
2