jbc advanced Series Manual

AD 2700
Control Unit 230V Ref. 2700200
WARRANTY
ENGLISH Control Unit 120V Ref. 2700100
The JBC 2 years warranty, guarantees
this equipment against all manufacturing
defects, covering the replacement of
defective parts and all necessary labour.
Warranty does not cover product wear
due to use or mis-use.
In order for the warranty to be valid,
equipment must be returned, postage
paid, to the dealer where it was
purchased enclosing this, fully filled in,
sheet.
GARANTIA ESPAÑOL
JBC garantiza este aparato durante 2
años, contra todo defecto de
fabricación, cubriendo la reparación con
sustitución de las piezas defectuosas
e incluyendo la mano de obra necesaria.
Quedan excluidas de esta garantía las
averías provocadas por mal uso del
aparato y desgaste por uso.
Es indispensable para acogerse a esta
garantía el envio del aparato al
distribuidor donde se adquirió, a portes
pagados, adjuntando esta hoja
debidamente cumplimentada.
GARANTIE
FRANÇAIS
JBC garantit cet appareil 2 ans contre
tout défaut de fabrication. Cela
comprend la réparation, le remplacement
des pièces défectueuses et la main
d'oeuvre nécessaire.
La garantie ne couvre pas l'usure liée à
l'utilisation et à la mauvaise utilisation
du matériel.
Pour bénéficier de cette garantie il est
indispensable d'envoyer l'appareil chez
le distributeur où il a été acquis, en
ports payés, en joignant cette fiche
dûment remplie.
Cartridges
2210
2210 handpiece See overleaf for range
Cartridges
2245
2245 handpiece See overleaf for range
2245 handpiece
Ref. 2245000
2245 cartridges
2210 handpiece
Ref. 2210000
2210 cartridges
Structure of Advanced soldering stations
system
The Advanced series has basic modules giving
you full flexibility for choosing what you need for
the work in hand, the modules being supplied
separately.
Soldering station: AD 2700.
Dual soldering stations: AD 4300 and DD 5700.
Digital soldering stations: DI 2850 and DI 3000.
4 Tool station: DM 6700.
Handpieces: 2210 and 2245.
Cartridges: range of 2210 and 2245 cartridges.
Stands:
- AD 8210 soldering iron stand Ref. 0788210 This
stand has been especially designed for the 2210
handpiece.
- AD 8245 soldering iron stand Ref. 0788245 This
stand has been especially designed for the 2245
1 - Place the handpiece and remove the cartridge.
handpiece.
For a station to work properly, a control unit, a
handpiece and one cartridge are needed. The
soldering iron stands are necessary to connect
the handpieces to the AD 4300, DD 5700, DI 2850,
DI 3000, DM 6700, DS 5300, AR 5800 and AM
6800 stations.
HANDPIECES
- 2210 handpiece Ref. 2210000.
Power: 20W. For high precision work,
SMD, etc.
- 2245 handpiece Ref. 2245000.
Power: 50W. For general soldering work.
One version of soldering iron handpiece
3 - Press the cartridge into the opening A, B or C:
covered with heat isolater is available:
A. For straight 2210 cartridges.
- 2245 confort handpiece Ref. 2245110.
B. For curved 2210 cartridges.
The 2210 and 2245 handpieces and cartridges
C. For 2245 cartridges.
comply with the MIL-SPEC-2000 referring to
the potential difference between the soldering
tip and ground connection, must be less than
2 mV.
For 2245 handpiece:
T h e 2 2 1 0 a n d 2 2 4 5 h a n d p i e c e s c a n b e
Standard Ref.0495000
connected to the following JBC stations:
Confort Ref.0781324
AD 2700, AD 4300, DD 5700, DI 2850, DI 3000,
+20mm longer Ref.0455002
DM 6700, DS 5300, AR 5800, AM 6800 and
MS 9000.
Changing the handpiece's cartridge
2 - Place the handpiece on top of the new cartridge,
press it slightly down and remove the handpiece.
Alignment
Important.
- It is essential to insert the cartridge till the
end for a good connection. Take the mark
as reference.
Fume extractor accessories
Specially designed for the Advanced Series
2210 and 2245 handpieces. Easily clips onto
the handpiece and can be quickly removed
for easy maintenance.
For 2210
handpiece
Ref.0265000
SOLDERING
H A N D P I E C E S
2210
2245