ORTHOSCOOT NH1 User Manual page 37

As shown in the figure, hold the front wheel with both
hands. Push the red rubber tip with your thumb up to
the stop in order to release the locking mechanism.
Once locked in place, the wheel is secured.
Now place the ORTHOSCOOT
on the ground and fold the handlebar unit upwards.
ORTHOSCOOT NH1
®
with all three wheels
®
To ensure safety, please check again the tight seat by
trying to pull the wheel out of its position with both
hands.
Lock the handlebar unit by turning the quick-release
lever and tension it. As soon as it is completely lo-
cked, the red safety knob at the side jumps out. Now
the fastener is secured.
35