Table of Contents
Advertisement
3.When the burning log prompts
been burned.
When first burning or the firmware program runs abnormally, you can click
"Erase" to erase the flash memory. In the subsequent firmware update, there is
no need to erase again, otherwise the saved Wi-Fi information will be deleted
and the API Key will be refreshed.
Configure WIFI
UIFlow provides both offline and web version of the programmer. When using the web
version, we need to configure a WiFi connection for the device. The following describes
two ways to configure WiFi connection for the device (Burn configuration and AP
hotspot configuration).
Burn configuration WiFi(recommend)
UIFlow-1.5.4 and versions above can write WiFi information directly through
M5Burner.
Burn Successfully
, it means that the firmware has
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the M5STICKC PLUS and is the answer not in the manual?
Questions and answers
Что делать если нрф24 не работает
If the NRF24 module is not detected when connected to the M5StickC Plus 2, check all the wiring to ensure proper connections.
This answer is automatically generated
Почему стик включается только когда стоит на зарядке