Usb Operation - Oakcastle DVD100 User Manual

USB OPERATION

EN
USB Playback
This device has a USB port in the front interface for MP3/Movie playback.
Insert a USB device into the USB port (Ref.40).
Press the USB button on the remote control (Ref.35) and select 'USB' to switch the
source to USB. The DVD player will display the file list on the USB drive and start
playing the first track.
Browse through the file list by pressing the up and down buttons (Ref.10/Ref.29)
on the remote control. Select a file by pressing the Enter button (Ref.12) of the
remote control.
USB Drives and MP3 Discs - Playback controls
When playing from an MP3 disc or USB drive, use the following playback controls.
Use the Play/Pause button (Ref.8) to play or pause a track.
Use the Stop button (Ref.26) to stop a track.
Press the Previous/Next buttons (Ref.25)/(Ref.24) to skip to the previous or next
track.
Use the Rewind/Fast Forward buttons (Ref.5)/(Ref.6) to rewind or fast forward
through a track.
Programme Mode
To begin programming the tracks to play in a specific order, press the PROG
button (Ref.3). Use the buttons to shift to the next track position you
wish to program. Then use the digit buttons (Ref.4) to key in the track you wish
to program to that position. Follow these steps for each track slot. When finished,
select Start to play the tracks in that order.
To exit Program mode, press the PROG button (Ref.3) again.
Note: USB port does not support USB charging for external devices.
9