Getting Started - Oakcastle DVD100 User Manual

GETTING STARTED

EN
Setting Up
Connect the DVD player power adapter to a wall outlet. Press the power button
(Ref.44/Ref.1) on the unit or remote control to turn on your DVD player, the display
on the front panel will illuminate.
Follow one of the steps below for connecting your DVD player:
Connecting Via RCA Cable
Connect an RCA cable between the 2 channel Audio Output port and the RCA input
on your TV.
Connecting via HDMI
Connect a HDMI cable between the HDMI Output on the back panel of the DVD
player (Ref.46) to the HDMI input on your TV.
Connecting via Component (Y Pb/Cb Pr/Cr) Cable
Connect a (Y Pb/Cb Pr/Cr) cable via the (Y/Cb/Pb Cr/Pr) Output of the DVD player
(Ref.45) to your TV (R/L/Video port and cable).
Programme Button
If the disc has two or more tracks, chapters, or titles, if desired, you can set up
playing order preference to be in a different order to the default order. Press the
PROG button (Ref.3) to open up Program mode, then use the number buttons
(Ref.4) to input the number of the track, title or chapter. To enter a double digit
number, first press the 10+ button once to get 10, twice to get 20, and so on,
followed by the second digit of your preference. Use the up/down/left/right keys
(Ref.10/Ref.11/Ref.28/Ref.29) to move the cursor to the next track, chapter or title
position you wish to program. After programming, navigate to the 'PLAY' button on
the screen, then press ENTER button (Ref.12) to start program playing. Navigate
to the CLEAR button on the screen, then press ENTER button (Ref.12) to clear all
settings.
To exit Program mode, press the PROG button (Ref.3) again.
7