Battery Cover - Doro HandleEasy 326GSM Manual

Hide thumbs Also See for HandleEasy 326GSM:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
English
Connecting other accessories may invalidate the telephone's
type-approval and guarantee; furthermore it could be dangerous.
Connection to a USB port on a computer may damage the
telephone or the computer.

Battery cover

To remove the battery cover on the back of
the telephone, press carefully on the ribbed
surface and slide the cover downwards.
To replace, slide the cover from below and up
along the telephone.
Installation/removal of battery
Insert the battery with the contacts facing upwards.
Place the top of the battery in the holders on the
telephone. Then press carefully on the bottom of
the battery until it locks in place. To remove the
battery, carefully press and lift the bottom of the
battery in the "finger-shaped" groove.
Installation/removal of SIM card
The SIM card holder is located under the
battery cover behind the battery. Make sure
that the SIM card's gold contacts are facing
inwards and the cut-off corner is correctly
positioned (upwards). The SIM card and its
contacts are easy to damage if you scratch or
bend them, so be careful when you handle,
insert or take out the card. If the SIM card is
missing or has been inserted incorrectly,
will be shown in the display.
0

Advertisement

Table of Contents
loading

Table of Contents